Youngblood Eye-Mazing Liquid Liner Pen, Noir, 0.59 Fluid Ounce
- All prices mentioned above are in United States dollar.
- This product is available at Amazon, eBay, Walmart.com.
- At amazon.com you can purchase Youngblood Mineral Cosmetics Natural Eye-Mazing Liquid Liner Pen - Noir - 0.59 ml / 0.02 fl. oz. for only $16.75
- The lowest price of Bathroom Vent Fan Motor and Ceiling Blower Wheel Replacement Electric Motors Kit Compatible with Nutone Broan 50CFM 120V (1 Pack) was obtained on June 22, 2024 1:53 am.
Set Lowest Price Alert
×
Notify me, when price drops
Set Alert for Product: Youngblood Mineral Cosmetics Natural Eye-Mazing Liquid Liner Pen - Noir - 0.59 ml / 0.02 fl. oz. - $16.75
eBay
Walmart.com
Youngblood Eye-Mazing Liquid Liner Pen, Noir, 0.59 Fluid Ounce
$16.75
Description
The best price for Youngblood Eye-Mazing Liquid Liner Pen, Noir, 0.59 Fluid Ounce
- Skin Friendly Ingredients
- Help To Boost Your Appearance
- Gives You Attractive Look
Additional information
Specification: Youngblood Eye-Mazing Liquid Liner Pen, Noir, 0.59 Fluid Ounce
|
Price History
-
Reviews (12)
12 reviews for Youngblood Eye-Mazing Liquid Liner Pen, Noir, 0.59 Fluid Ounce
Show all
Most Helpful
Highest Rating
Lowest Rating
Paul M. –
Oh my goodness!!! This has got to be the best liquid eyeliner I have ever used. It stays on all day long but is easy to remove. I will be buying this again and again!!
Paul M. –
Oh my goodness!!! This has got to be the best liquid eyeliner I have ever used. It stays on all day long but is easy to remove. I will be buying this again and again!!
Patrice Carter –
This is the greatest eyeliner that I have ever used. Highly recommend
Savavieh –
The Noir is consistently dried up when I start using.
Ann Greenan –
Will not move from applicator to eyelid…… too dry.
Matt –
This motor worked perfectly for the Broan Nutone 763RL vent I put it in. Be sure you measure the shaft length on the original motor you are replacing. I found most of the fan shafts, online and in-store, measure 3/16 X 1 3/4 (1.75) inches, which was just a bit too long for what I needed. This particular fan motor shaft measured 3/16 X 1 1/2 (1.5) inches which was what I needed to make it fit. The fan blade itself looked the same but the hole the shaft is supposed to fit into was super tight and I was afraid I might break it if I forced it any more (seller should address this). I just used the original fan from the broken motor which worked fine. If you have to use the included fan blade, I recommend using a drill bit just big enough to bore it out slightly. I also used the original screws from the old motor because they were just a bit shorter and fit better for my vent space. It comes CCW which is what I needed, but you can flip it around if you need it CW. Very quiet compared to the old one and I would buy it again. This is a 50 CPM for a small bathroom and it plugs right in.
kittyracecar –
Liquid gel liners will easily dry up. This one was completely dried up. Don’t know if it was old or just not packaged properly.
JRK –
Loads kept shutting off early as heavier items bumped the door. These tightened the seal and fixed the issue. Took less than five minutes to install. Exactly what was needed.
Tellurium –
I purchased this to fix dryer door that no longer stay closed on my GE washer/dryer tower. The genuine part number WE1X1192. I went to GE parts website first but they didn’t have this in stock. I am so glad I found this on Amazon, it fit perfectly and it was a super easy fix! I couldn’t believe I wasted months being frustrated with the dryer door popped open while drying. If your machine has the same symptom, don’t hesitate and get this!
Madelynn Meadows –
This piece worked perfectly for our dryer door! Just had to pop it into place and now the door latches shut again😊
Martin Blessing –
This was a fairly easy DIY repair to our circa 1992 fan above our shower that was at first noisy an then finally wouldn’t run. The fan comes separate from the motor in the box. The motor has a splined shaft that is a very tight fit in the fan hub hole. I wound up using a drill to open up the hole slightly, as I was afraid that forcing the shaft into the hole would split it. The fan itself has noticeably thinner plastic than the old one. Once on the shaft, match the fan position along the shaft to your old unit. The rest of the installation is easy and the unit is working well.
RJC –
I double checked the model of our vent fans before ordering and was able to replace both of our bathroom fans with ease. The new fans are very efficient, if a bit noisy, but we also use them for white noise, so this is actually a benefit for our purposes. When these give out in a few years, I will definitely rebuy.