Princesse Marina De Bourbon – Golden Dynastie For Women – Floral Woody Musk Fragrance – Top Accords Are Orange, Green Apple And Fresh Herbs – Lasting Aura Of Opulence And Luxury – 1 Oz Edp Spray
- All prices mentioned above are in United States dollar.
- This product is available at Amazon.
- At amazon.com you can purchase .325"Clutch Drum Drive Bell Needle Bearing Kit For Husqvarna 350 340 345 445 450 450E 351 353 Chainsaw 578097901,5038730-73 for only $16.99
- The lowest price of .325"Clutch Drum Drive Bell Needle Bearing Kit For Husqvarna 350 340 345 445 450 450E 351 353 Chainsaw 578097901,5038730-73 was obtained on July 13, 2024 5:02 pm.
Set Lowest Price Alert
×
Notify me, when price drops
Set Alert for Product: .325"Clutch Drum Drive Bell Needle Bearing Kit For Husqvarna 350 340 345 445 450 450E 351 353 Chainsaw 578097901,5038730-73 - $16.99
LS Won –
One of the needle bearings came out but I gently pressed it back in place
neil –
Never have to replace those plastic pieces anymore! Work good on a 03 accord fit doesn’t look right but they hold and work as they should.
Foodie –
Water was leaking from the door at a point about 5″ in from the right side. Seemed like the bottom gasket was all that would be needed (we passed on the whole door gasket for now).We looked at everything. We wondered about the notch in the middle which our 7 year old part didn’t have. Someone somewhere explained that the notch lets water that gets trapped flow back into the tub and that seems possible. It did come coiled up, though not as tightly as some have said. There are no instructions (there are youtube videos out there) but the seller page on Amazon said to do various things and we did one of them: put it in a large tub of hot water until it lays flat. In about an hour it was pretty flat with some vague kinks but nothing that looked untoward.There is a notch on the right side facing the unit. We suggest getting a mirror and looking backwards on the door and you’ll see a tiny tab. We took a pencil and marked the gasket on the plastic up from the notch so that we could eyeball where the strip should be. Make sure to get the notch over the tab. If properly placed it doesn’t go ALL the way back, the flange like material is poking out. The middle notch is completely exposed and there is about 1/8″ of plastic behind it that is poking out, at least on ours. BTW, don’t just put it in and start a cycle. We found that we didn’t have it inserted properly (though we’re not sure exactly why) and when we closed the door and opened it the whole strip had fallen almost completely out. It took a few tries to get it right.One person somewhere insisted that you take the door off and clean out any crud. Easy, they say, just about 6 screws. Well there is some electrical in there and on our unit some of the screws were standard and some were specialty ‘torx’ style. You might need something you don’t have. We just took a bunch of q-tips and got as much crud out as we could. Using our mirror we didn’t see much, if any, left.So far, so good. No leaks after a few cycles.Some places are selling what is probably exactly the same thing for 3 times as much. Ours was $12.12 (including tax). The gasket package said “Repairwares” and it was sold by “Better Surplus” and was fulfilled by Amazon. How long will it last? Way too soon to tell, but it was cheap enough to take a shot.Hope this helps the next somewhat clueless (like us) do-it-yourself-er.
Brenda –
There’s not much to say – it’s a replacement gasket. It was easy to install once we figured out where the groove was that it was supposed to fit into. Once it was snapped into place properly it has stayed put and done its job.
Steve –
I was a little worried that it would break or wear out from my repeated attempts… looked so simple on YouTube and I didn’t see any other groove that I could have accidentally put it in the wrong slot so I was pretty frustrated when it didn’t go in firmly. I almost gave up but I’m glad I gave it one more try because I could tell right away that this was it, it went in firmly and stayed and now my dishwasher isn’t leaking anymore.
Don –
I just happened to notice that my chain was getting loose so I went to clean and adjust it. That’s when I found out that the sprocket was extremely worn. This will make it like new again. So in short, if you use your chainsaw much, check the sprocket every now and then and replace if needed.
Andrea Tolley –
Unknowing to us, our previous dishwasher seal had deteriorated. That left us with water damage to our kitchen floors from flooding. I was able to install the new seal within seconds. It worked like a charm and prevented us from needing to buy a new dishwasher.
ccollins89 –
I’ll admit, I was nervous because I wasn’t sure if I ordered the right part for my Frigidaire. Turns out I did, and it fits like a glove!
Mike Yetsko –
Be aware that if you don’t know how to install this you can tear your hari out for hoursThe trick is with the door open this inserted HORIZONTALLY to match the door being open. It has to catch in a slot up inside. If you try to install this other than parallel to the door front it will not catch that slot.Once you understand, it’s easy to installThe part however, is fine. It’s worth the money and works extremely well
Yuhgirla –
Exactly what I needed!
19Reilly78 –
5-10 second install. Just push to click in place. No tools required. For the middle row on the door where the gallon of milk fits. The old one cracked because we tried to fit too much stuff on the door.
Jdm45 –
Works as it should
Sam Williams –
The parts fits well on a husqvarna 345 chainsaw. Good price, but can not comment on the longevity/ durability since I have not used the saw but a month since the replacement. Works well now.
Sam Williams –
The parts fits well on a husqvarna 345 chainsaw. Good price, but can not comment on the longevity/ durability since I have not used the saw but a month since the replacement. Works well now.
HOPPER –
Nice addition,way better than spur drive ,easy repair for a tired clutch .Prefer the rope method to lock piston,really should buy clutch removal tool
Adri –
These are not the right clips. Total waste of time and money.
DJ –
Great deal! Great packaging! Works great! Will buy again!
Zachary robinson –
Good