BrowFood 24-H Tri-Feather Brow Pen, Charcoal

I bought this for my sister because I love the product so much and it comes out GREEN when applied to the face. Please refund me!

I love this brow pen. But, it seems to stop coming out. I don’t know why. I wish the application process was more consistent. Once you get it to apply, it looks great and stays pretty well.

I love this brow pen. But, it seems to stop coming out. I don’t know why. I wish the application process was more consistent. Once you get it to apply, it looks great and stays pretty well.

Good control and color and I do believe the hair has come in on a sparse patch I had. It does not give sharp, hair-like marks.

Pen arrived without enough product to work. I had to dissemble the pen to squeeze out what was left, the pen is not functional

Pen arrived without enough product to work. I had to dissemble the pen to squeeze out what was left, the pen is not functional

I have a Kenmore elite 795.79783.901. There were some conflicting part numbers out there but this one is a perfect fit on the cheap. Durability is tbd as I just got it, but install was a few minutes. I thought tearing out the valve would be hard, so I first tried buying the tube and syringe gizmo Amazon also sells to melt a frozen supply line that wasn’t actually the problem. For this model, it’s easy and free to check the valve before you buy that kit or a new filter or anything. A few things I figured out – at least about this specific fridge model – to help decide whether this is what you need:1) some “expert” on YouTube said if it hums when you press the water switch then it isn’t the valve. Fortunately I knew this was false. The hum means the valve is getting power, but it could still be stuck closed or clogged.2) other YouTubers tell you to get out a multimeter to check electric continuity of the valve solenoid. This might be a worthwhile next level thing but you don’t need to know how to do this, or even what this means, for a quick check.3) Here’s how to check: Just unplug the fridge, and locate the water valve somewhere in your kitchen that turns off the fridge water supply. It’s right behind your fridge on the wall or in the supply line if you’re lucky. Don’t turn it off at this point and you shouldn’t need it, but it’s good to be ready if something isn’t as you expect. You will need to know this anyway later if you replace this refrigerator valve. Remove the back panel from the fridge (a few screws), but be careful for some possible sharp edges in the middle of it. I cut myself, but would have been easy to avoid if I realized anything was sharp there. Remove the one screw to take the valve off the fridge. The valve is right on the back and looks like this listing picture – you won’t need to be digging around inside the fridge to find it. On the valve, remove the quick disconnect water line going to the fridge, but don’t disconnect the white power connector or the water supply line, and leave the water supply turned on. Water should not come out anywhere at this point. Next, put a dish or towel under the valve and plug the fridge back in (don’t forget to unplug it again whenever you mess with stuff back here). Press the water switch, being ready for water to come out of the valve when you do.If water came out where you disconnected the water line, the problem is somewhere else in the lines (likely ice, a clog or the filter), and not the valve or any of the electrical stuff controlling the water. You can put things back together and skip this purchase because your problem isn’t back here.3) if water didn’t come out in step 2, it could be this valve, or a switch, or the control panel, or something else wrong with the wiring. Mine did make a humming noise when I pressed the water switch, meaning my electrical stuff was working and the valve was trying to open. When I got no water in step 2, the issue was extremely likely to be the valve. If yours isn’t making any noise when you try to get water, you could go back to YouTube and learn how to do the electrical checks to narrow it down, or try buying this valve. It’s cheaper and easier than a service call or any of those other parts it might be, but I haven’t tried the return process if this isn’t it.This part arrived fast and took me all of 5 minutes to replace (with a powered screwdriver), especially when I had already taken it apart and knew how everything went together. The only thing different from what you just did to check it is you would also turn off the water supply valve and disconnect that and the white power connector from the old valve. Pay attention to how they come off and put the new one on the same way. If you have the strength to move the fridge and have a screwdriver and either pliers or a wrench, you can totally do this yourself. Easy and cheap fix but would have been quicker if I had just done this first.

After transmission failure, and radiator failure, my passenger window made crunching noises then the window went down quick thankfully the glass didn’t break. i’ve had two vans when this has happened 6 times between them. with the current 2016 i had it done at firestone knowing it was 300$ sadly it ballooned to 400$ a year plus later and out of warranty couldn’t afford that the associate lady at the counter asked me that her husband is off today and let me call him. she did and i had it done for cost and parts $289. and since i saw how it was done i now knew hat to do. and this time around was 3+hrs and 68$ part and 7$ can of silicone lubricant. additionally i already had some sound proofing adhesive pads and spray and this was done as well. tapping the outside vs the other doors makes a .25% difference and i liked that i was able to do it myself after already dropping $6200 on the previously mentioned replacement/repairs. hopefully my long winded story helps.

Easy to order, it came on time and it was easy to install after watching You Tube videos. We changed out the filters and this water inlet valve, and our water dispenser is working like new again!