Ajmal Amber Poivre Unisex EDP Spray 3.4 oz
- All prices mentioned above are in United States dollar.
- This product is available at Amazon.
- At amazon.com you can purchase Repairwares Universal Dryer Igniter WE4X750 4391996 304970 3-4970 3-04970 101 101M AP2042796 WE04X0750 2101 56970 276846 (Standard Bracketless Flat Style Ignitor) for only $19.99
- The lowest price of Ajmal Amber Poivre Unisex EDP Spray 3.4 oz was obtained on June 22, 2024 1:13 am.
Set Lowest Price Alert
×
Notify me, when price drops
Set Alert for Product: Repairwares Universal Dryer Igniter WE4X750 4391996 304970 3-4970 3-04970 101 101M AP2042796 WE04X0750 2101 56970 276846 (Standard Bracketless Flat Style Ignitor) - $19.99
Mckayla –
Product came nicely packaged to prevent damage to the element. This igniter does not come with the mounting bracket so the original bracket must be used. This can be replaced to fix a dryer that isn’t heating.Replacement is simple, begin by lifting the top panel of the dryer. Next, remove the two screw that hold on the front panel at the top. Pull the front panel away from the clips. My dryer panel had to be pulled upwards off of the clips to be removed. Once removed, depress the tensioner pulley on the belt to slide the belt off of the motor. This will allow you to remove the drum and get better access to the igniter as the igniter is very fragile. Unplug the old igniter, unscrew the mount and remove the assembly. Unscrew the old igniter from the bracket and screw the new one in until the igniter can not be moved from side to side. Do not overtighten the mounting screw. At this time, wipe off any residue that may be built up on the flame sensor or the flame eye. This is a small piece that is normally right beside the igniter. Also take the time to clean out any lint and debris from inside the cabinet. Finally, carefully slide the new igniter into place and screw the mount in. Plug the igniter in and put dryer back together. Slide the drum into place (this may be easier with two people) and slip the belt back over the motor by depressing the pulley. I would also recommend replacing the belt while you already have the drum out, but it might not be necessary. Place front panel back on and push the top back down into place.****Always remember to disconnect power and shut the gas to the dryer off prior to working on the unit.Front panel also has a door latch sensor that must be unplugged prior to removing the panel. Take a picture or mark these wires to ensure they are plugged back in the proper way.
loubyu –
It does what it’s supposed to do. And delivered in 24 hours. Very nice.
Claudia Hormann –
Sehr schöner Duft
Claudia Hormann –
Sehr schöner Duft
Claudia Hormann –
Sehr schöner Duft
Laurinda Howe –
When our dryer’s ignitor went out, we struggled to find one locally. We have five people using our washer and dryer, so they get used almost daily. We found this one on Amazon. We were not thrilled with the shipping. It didn’t get sent right away and was delayed, and then due to a holiday was delayed an extra day. By this time we did find one locally for $30 more! For a couple days the few items we washed were either dried at a friend’s house or line dried. Finally the part arrived and it was an exact match. Super easy to install and seems to be working perfectly. I can’t tell you about longevity. We haven’t had it that long yet, but overall for the price and difficulty to find, waiting the extra couple days was worth it.
Harry G Stover –
Did not fit my water filter. Sending it back.
FCBerry –
This fit perfectly in our grill! Much better quality than what was purchased at other home stores.
FCBerry –
This fit perfectly in our grill! Much better quality than what was purchased at other home stores.
W Link –
Perfect fit for OEM o-rings, will buy again when needed
protocol25 –
Works perfectly. Easy to install and works exactly as it should.
Brion G. Antoine –
I’m actually thinking about buying another set of burners and grate for my grill. This really extends the life of a grill as the cost is appropriate and not equal to the cost of a new grill. Very Pleased.
Brion G. Antoine –
I’m actually thinking about buying another set of burners and grate for my grill. This really extends the life of a grill as the cost is appropriate and not equal to the cost of a new grill. Very Pleased.
Mark A. –
I was gifted an old Char-broil 5 burner in need of some love. After a season of use, I decided new grates would be step one on extending the life of this big grill and these do a great job. They fit well and are quite sturdy. My only wish would be a more non stick coating or easier to clean. The cast iron doesn’t have the self release I am accustomed to. I soak in hot soapy water and use a stiff nylon brush to bring back to like new.
Andrew –
The brand new range only lasted a couple years before this part broke. I ordered an OEM ignitor which also lasted a couple years. This part is half the price and does the job. I really don’t expect it to last longer than the OEM part but at half the price, I don’t really care. I’ve ordered a spare one so I can do an emergency repair if needed.
Megan –
They’re a nice replacement. $300 grill so it suits my purpose. Length wise they’re about 0.15 short and about 0.25 width short but otherwise no complaints
Anon –
Just cut the wires to the old one, install this, and use the twist caps to join up to the old wires. It fired up red hot! No idea how long we had the old one since it was there when we moved in. No idea how long this one will last, but we’ll see.
Steven Soibelman –
I ordered the part and had it the next day, it fit like the OEM part and was a good deal. I would reorder from them again.